• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern:Cardioid
• Frequency Response:20Hz-20kHz
• Power Requirements: USB Power (5V DC)
• Bit Depth: 16 bit
• Sample Rate: 44.1/48 kHz
• Volume Control: Mix control; Headphone volume control
• Weight: 386 g (13.6 oz)
• Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: USB-type
• Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
• Headphone Jack: 3.5 mm (1/8") TRS (stereo)
• System Requirements: Windows 8.1, Windows 10, and Mac OS X or later; USB 1.0 or 2.0, and 64 MB or more of RAM
• Accessories Included: AT2020USB+ (dark gray model): Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern:Cardioid
• Frequency Response:20Hz-20kHz
• Power Requirements: USB Power (5V DC)
• Bit Depth: 16 bit
• Sample Rate: 44.1/48 kHz
• Volume Control: Mix control; Headphone volume control
• Weight: 386 g (13.6 oz)
• Dimensions: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: USB-type
• Headphone Output Power: 130 mW (at 1 kHz, 10% T.H.D., 32 ohm load)
• Headphone Jack: 3.5 mm (1/8") TRS (stereo)
• System Requirements: Windows 8.1, Windows 10, and Mac OS X or later; USB 1.0 or 2.0, and 64 MB or more of RAM
• Accessories Included: AT2020USB+ (dark gray model): Pivoting stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch; tripod desk stand; 10' (3.1 m) USB cable

• System requirements: USB 1.0 or 2.0, and 64 MB or more of RAM
• Supported OS: Windows 8.1, Windows 10, and Mac OS X or later
• Element: Fixed-charge back plate, permanently polarizeds condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Power Supply: USB Power (5 VDC)
• Bit Depth: 16 bit
• Supported Sampling Rates: 44.1 kHz/48 kHz
• Controls: Headphone level control, Mix control
• Dimensions: 162mm . (6.38") long, 52mm (2.05") maximum body diameter
• Weight: About 386g
• Output connector: USB Type-B
• Headphone Output: 130 mW (at 1 kHz, 10% T.H.D., 32 ohms)
• Headphone Jack: 3.5mm (1/8") stereo mini-jack
• Included Accessories: AT8458a shock mount, S/8"-27 to 3/8"-16 threaded adapter, USB cable (3.0m (9.8'), USB Type-A, USB Type-B, Pouch

• System requirements: USB 1.0 or 2.0, and 64 MB or more of RAM
• Supported OS: Windows 8.1, Windows 10, and Mac OS X or later
• Element: Fixed-charge back plate, permanently polarizeds condenser
• Polar Pattern: Cardioid
• Frequency Response: 20-20,000 Hz
• Power Supply: USB Power (5 VDC)
• Bit Depth: 16 bit
• Supported Sampling Rates: 44.1 kHz/48 kHz
• Controls: Headphone level control, Mix control
• Dimensions: 162mm . (6.38") long, 52mm (2.05") maximum body diameter
• Weight: About 386g
• Output connector: USB Type-B
• Headphone Output: 130 mW (at 1 kHz, 10% T.H.D., 32 ohms)
• Headphone Jack: 3.5mm (1/8") stereo mini-jack
• Included Accessories: AT8458a shock mount, S/8"-27 to 3/8"-16 threaded adapter, USB cable (3.0m (9.8'), USB Type-A, USB Type-B, Pouch

• Element: Fixed-charge back plate permanently polarized condenser
• Polar Pattern:Cardioid
• Frequency Response:20Hz-20kHz
• Low Frequency Roll Off: 150Hz, 6 dB/octave
• Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.
• Noise: 17 dB SPL
• Dynamic Range: 124 dB, 1 kHz at max SPL
• Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
• Phantom Power Requirements: 48V DC, 2mA typical
• Switches: Flat, roll-off
• Weight: 134 g
• Dimensions: 143.0 mm long, 21.0 mm maximum body Ø
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8405a stand clamp; windscreen; soft protective pouch

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern:Cardioid
• Frequency Response:20Hz-20kHz
• Low Frequency Roll Off: 80Hz, 12 dB/octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at max SPL
• Signal-to-Noise Ratio: 82 dB, 1 khz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern:Cardioid
• Frequency Response:20Hz-20kHz
• Low Frequency Roll Off: 80Hz, 12 dB/octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range: 136 dB, 1 kHz at max SPL
• Signal-to-Noise Ratio: 82 dB, 1 khz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 403 g (14.2 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5

• Dynamic microphone delivers warm, assertive broadcast sound that’s perfect for podcasting
• Large diaphragm for smooth, natural sound and low noise
• Multistage foam mesh windscreen provides superior internal pop filtering
• Integrated shock mount attenuates noise, shock and vibration transmitted through mic stands, booms and mounts
• Hypercardioid polar pattern reduces pickup of sounds from the sides and rear for maximum vocal isolation
• Includes pivoting stand mount, 5/8"-27 to 3/8"-16 threaded adapter, and a soft protective pouch
• Element: Dynamic
• Polar Pattern: Hypercardioid
• Frequency Response: 80-16,000 Hz
• Open Circuit Sensitivity: -53 dB (2.2 mV) (0 dB=1 V/Pa, 1kHz)
• Impedance: 600 ohms
• Weight: 615g (21.7 oz)
• Dimensions: 145.3 mm (5.72") long, 52 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8487 mounting clamp, 5/8”-27 to 3/8”-16 threaded adapter, Pouch
• Audio-Technica Case Style: R13

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern:Cardioid, Omnidirectional, Figure-of-Eight
• Frequency Response:20Hz-20kHz
• Low Frequency Roll Off: 80Hz, 12 dB/octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range: 136 dB, 1 kHz at max SPL
• Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Weight: 412 g (14.5 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5

• Element: Externally-polarized (DC bias) condenser
• Polar Pattern:Cardioid, Omnidirectional, Figure-of-Eight
• Frequency Response:20Hz-20kHz
• Low Frequency Roll Off: 80Hz, 12 dB/octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range: 136 dB, 1 kHz at max SPL
• Signal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Weight: 412 g (14.5 oz)
• Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Included: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• Audio-Technica Case Style: R5

• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW at 1 kHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Weight: 285 g (10 oz), without cable and connector
• Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW at 1 kHz
• Sensitivity: 99 dB
• Impedance: 38 ohms
• Weight: 285 g (10 oz), without cable and connector
• Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
• Cable - Detachable: Yes
• Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Folding/collapsible: Yes
• Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Frequency Response: 15 - 28,000 Hz
• Maximum Input Power: 1,600 mW at 1 kHz
• Sensitivity: 102 dB
• Impedance: 38 ohms
• Weight: 200 g (7.1 oz), without cable and connector
• Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cable
• Magnet: Neodymium
• Voice Coil: CCAW (Copper-clad aluminum wire)
• Accessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

HIGHLIGHTS

• Type: Closed-back dynamic
• Driver Diameter: 45 mm
• Frequency Response: 5 - 40,000 Hz
• Maximum Input Power: 2,000 mW at 1 kHz
• Sensitivity: 100 dB
• Impedance: 37 ohms
• Weight: 220 g (7.8 oz), without cable and connector
• Cable: Interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 1.2 m (3.9') straight cable
• Connector: 3.5 mm (1/8") stereo mini-plug
• Magnet: Neodymium
• Accessories Included: 6.3 mm (1/4") screw-on adapter

• Nominal Input Level: -20 dBu
• Input Impedance: 1 M ohm
• Nominal Output Level: -20 dBu
• Output Impedance: 1 K ohm
• Recommended Load Impedance: 10 K ohms or greater
• Bypass: Buffered bypass
• Controls: MODE knob, TOP knob, BODY knob, REVERB/LEVEL knob, Pedal switch
• Indicator: CHECK indicator (Used for indication of check battery)
• Connectors: INPUT jack: 1/4-inch phone type, OUTPUT jack: 1/4-inch phone type, G.AMP OUT(Guitar Amp Out) jack: 1/4-inch phone type, DC IN jack
• Power Supply: Alkaline battery (9V, 6LR61), AC adaptor (PSA series: sold separately)
• Current Draw: 50 mA
• Expected battery life under continuous use: Alkaline: Approx. 8 hours *These figures will vary depending on the actual conditions of use.
• Accessories: Owner's manual, Leaflet ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Alkaline battery (9V, 6LR61)
• Optional: AC adaptor: PSA series
• Size: Width*Depth*Height 73mm*129mm*59mm
• Weight: 425g